TLS-450 Setup and Operation Screens Manual
215
Final Volume
Allowable range: 0 to 264,172 gal (0 to 999,999L)
Fuel TC Volume
The Fuel TC Volume column will not be displayed unless the Print TC Volume feature is enabled in
System Setup and the probe measures temperature.
Allowable range: 0 to 264,172 gal (0 to 999,999L)
Mass
This column will not display if the probe does not measure density.
Allowable range: Depends on tank volume and fuel density
Fuel Density
This column will not display if the probe does not measure density.
Allowable range: 42.139 to 56.185 lbs/ft
3
(675.00 to 900.00 kg/m
3
)
Fuel TC Density
This column will not display if the probe does not measure density and if TC density is not enabled.
Allowable range: 42.139 to 56.185 lbs/ft
3
(675.00 to 900.00 kg/m
3
)
Water Height
This column will be blank if the probe does not measure water.
Allowable range: 0 to 390.0 in. (0 to 9906.0mm)
Fuel Temp.
This column will be blank if the probe does not measure temperature.
Allowable range: -40.0 to 140.0°F (-40.0 to 60.0°C)
Fuel Height
Allowable range: 0 to 390.0 in. (0 to 9906.0mm)
Control Button (on right of screen)
Select Range
Touch this button to modify (filter) the contents of the report.
Period
Default selection: All Records
Tank
Default selection: Current Tank
To Next Page
Loading...
Need help?
General
