Veeder-Root TLS-450 - Accuchart II Diagnostics - Calibration Feedback; Report Column Descriptions

TLS-450 Setup and Operation Screens Manual
324
AccuChart II Diagnostics - Calibration Feedback
This screen contains alarms and warnings that are only issued for Automatic AccuChart II, not Manual
Chart, or Remote Chart. Restarting calibration or the completion of calibration will clear these alarms,
except where noted.
To minimize the risk of false/premature alarms, no warnings will be posted until Automatic AccuChart II
has been running for at least 48 hours.
In addition to appearing in the AccuChart II Diagnostics - Calibration Feedback Warning Report, the
warnings described below will also be displayed in the Alarm Status button and the Alarm Reports.
Report Column Descriptions
Date & Time
Date and time alarm was posted.