TLS-450 Setup and Operation Screens Manual
360
Table of Alert Symbols
Safety and Alert Symbols are used throughout the help files to alert you to important system and safety
information. The table below explains symbols you may see when reading the online help setup and
operation instructions for this equipment.
High voltage exists in, and is supplied to, the device. A
potential shock hazard exists.
Fuels and their vapors are extremely explosive if ignited.
Fuels and their vapors are extremely flammable.
Live power to a device creates a potential shock hazard.
Turn Off power to the device and associated accessories
Heed the adjacent instructions to avoid equipment damage
or personal injury.
Touch the flashing System Status box to acknowledge the
alarm and turn off the beeper!
Knowledge of all related procedures before you begin work
is important. Read and understand all manuals thoroughly. If
you do not understand a procedure, ask someone who does.
To Next Page
Loading...
Need help?
General
