TLS-450 Setup and Operation Screens Manual
67
Tank Setup - Limits
The Tank Setup - Limits screen sets Tank capacity values, along with Tank Alarm set points. These
values apply to the currently selected Tank.
Maximum Volume (Label Volume)
Maximum or Label Volume alarm warns when the level of fluid in the tank exceeds the volume you enter
here. Set this value at a level higher than the High Product limit (See Figure 1).
Figure 1.
Allowable entry: 0 to 264,172 gallons (0 to 999,999 litres)
. Default: 0
To Next Page
Loading...
Need help?
General
