TLS-450 Setup and Operation Screens Manual
16
Understanding Alarms
What Happens When An Alarm Is Posted?
When the console posts an alarm, the console beeper sounds, the front panel LED associated with the
alarm type lights, the Alarm Report button/System Status box both flash and the System Status box
displays the alarm label (see example below):
The Alarm Report button and System Status box will continue to flash until you acknowledge the
alarm(s). The warning and alarm label(s) will continue to display (scroll) in the System Status box until
you correct the cause of the problem.
If your system has a printer, and it has been programmed to do so, reports will be printed of
programmed alarm events and notifications. Reference the Automatic Events Add Tasks - Print
topic.
NOTE: Each of the alarm notification annunciators discussed above can be turned off in
Custom Alarm
Setup, but the factory default setting is all enabled.
How Do I Silence the Console Beeper and Acknowledge the Alarm?
Touch the flashing Alarm Report button to display the Active Alarm Report (see example below):
To Next Page
Loading...
Need help?
General
