TLS-450 Setup and Operation Screens Manual
188
Label
This column lists the label of the device that is in alarm. If it is a general system alarm, this column will be
blank.
Alarm Description
This column lists the name of the alarm. If custom alarms are enabled, the custom alarm label will be
displayed.
Active Time
This column lists the date/time the alarm was posted.
Clear Date/Time
This column will be blank in most cases, however, there may be cases where alarms that have cleared
will appear in the Active Alarm List if the alarm has not yet been acknowledged.
Active Alarm Report Screen Refresh Rate
The active alarm data will be updated upon change of state.
Control Button (on right of screen)
Help Mode
Touching this button changes the report from a single- to a double-spaced row format. Touch an alarm
and a dialog displays the cause of the selected alarm and the console's standard alarm corrective action.
If custom alarm help has been enabled, and custom information entered for this alarm, the custom
information will be displayed with a link to the console's standard alarm cause/action text.
The Help Mode feature is disabled by default.
To Next Page
Loading...
Need help?
General
