TLS-450 Setup and Operation Screens Manual
58
Device Setup - Vapor Sensor
This screen allows you to setup Vapor sensors connected to the console. You access each of your site's
Vapor sensor setups by touching the desired button at the bottom of the screen.
Configured
Allowable selections: Enabled, Disabled
Default: Disabled
Address
Allowable selections: Choose from drop-down list of available Vapor sensors, Not Assigned
Default: Not Assigned
Label
Allowable selections: Up to 20 alphanumeric characters
Default: Blank
Address [2]
Allowable selections: Read-only - next sequential address
To Next Page
Loading...
