TLS-450 Setup and Operation Screens Manual
189
Alarm History Report
The Alarm History Report screen displays alarms for all devices, regardless of priority level and
state. TLS alarm events are added to the history when an alarm becomes active, is acknowledged or is
cleared. The default view is the 100 most recent alarm events.
Report Column Descriptions
#
This column lists the device code followed by device iteration number, e.g., T1. This column will be blank
for system alarms that are not device specific.
Label
This column lists the label of the device that is in alarm. If it is a general system alarm, this column will be
blank.
Alarm Description
This column lists the name of the alarm. If custom alarms are enabled, the custom alarm label will be
displayed.
To Next Page
Loading...
Need help?
General
