TLS-450 Setup and Operation Screens Manual
53
Device Setup - Type B Sensor
This screen allows you to setup Type B (3-wire) sensors connected to the console. You access each of
your site's Type B sensor setups by touching the desired button at the bottom of the screen.
Configured
Allowable selections: Enabled, Disabled
Default: Disabled
Address
Allowable selections: Choose from drop-down list of available Type B sensors, Not Assigned
Default: Not Assigned
Label
Allowable selections: Up to 20 alphanumeric characters
Default: Blank
Address [2]
Allowable selections: Read-only - next sequential address
To Next Page
Loading...
Need help?
General
