TLS-450 Setup and Operation Screens Manual
205
Environmental Reports - Sensor Status
The Sensor Status Report - All Sensors screen displays a report with the current status of the following
stand-alone sensors:
• Liquid
• Type A (2-Wire CL)
• Type B (3-Wire CL)
• Mag
• Ground Water
• Vapor
If a sensor is not in alarm, it will display the sensor as 'normal'. If there are any active sensor alarms they
will be displayed on this screen. At most there will be only 1 line per sensor either showing the sensor in
alarm or in a normal condition. Since this report displays all sensor types, there is no bottom sensor
ribbon used on this report. No select range is required as this a current status report and no report filter
will be used because the user can sort by sensor type.
Report Column Descriptions
#
This column lists the device code followed by device iteration number, e.g., L1.
To Next Page
Loading...
Need help?
General
