TLS-450 Setup and Operation Screens Manual
2
High voltage exists in, and is supplied to, the device. A potential shock
hazard exists.
Fuels and their vapors are extremely explosive if ignited.
Fuels and their vapors are extremely flammable.
Live power to a device creates a potential shock hazard. Turn Off power
to the device and associated accessories when servicing the unit.
Heed the adjacent instructions to avoid equipment damage or personal
Knowledge of all related procedures before you begin work is important.
Read and understand all manuals thoroughly. If you do not understand a
procedure, ask someone who does.
Safety Warnings
This system operates near highly combustible fuel storage tanks. Leaking tanks
can create serious environmental and health hazards.
If you have not been trained in proper service procedures and hazards involved,
refer all service to a qualified Veeder-Root Service Representative.
ATTEMPTING TO SERVICE TANK MONITORS AND EQUIPMENT WITHOUT
PROPER TRAINING CAN CAUSE DAMAGE TO PROPERTY, ENVIRONMENT,
RESULTING IN PERSONAL INJURY OR DEATH.
Improper programming and operation may result in equipment self-test failures
and submersible pump shutdowns. It is the owner's responsibility to:
1. Ensure that this equipment is properly programmed.
2. Promptly investigate any alarm conditions.
3. Operate this equipment in accordance with the instructions in this document.
To Next Page
Loading...
Need help?
General
