Veeder-Root TLS-450 - CDIM Advanced Tab Setups

TLS-450 Setup and Operation Screens Manual
151
ETX Characters - Display
Accepts non-printable characters through the GUI. Enter hex value as string with an opening and closing
bracket. Convert text string to char value and save or show. Example: Enter [0x06][0x15]
Allowable selections: 1 or 2 alpha-numeric characters (ASCII value 0 to 255)
Default: Blank
ETX Characters - Computer
Accepts non-printable characters through the GUI. Enter hex value as string with an opening and closing
bracket. Convert text string to char value and save or show. Example: Enter [0x06][0x15]
Allowable selections: 1 or 2 alpha-numeric characters (ASCII value 0 to 255)
Default: Blank
CDIM Advanced Tab Setups (page 2)
DIM Parameter String
Enter the desired parameter string for this DIM.
Allowable selections: Enter proprietary string. For additional string components, see Table below.
Default: Blank
DIM Parameter String Entries
Protocol
String
Description
Gilbarco
CL
T
Do not collect cumulative totals
R
Send captured message to TLS (engineering use
only)
W
Transaction field precision is hundredths
(thousandths default)
C
Cumulative field precision is hundredths
(thousandths default)
Wayne CL
R
Send protocol to TLS (engineering use only)
V-R
Protocol
J
Suppress Communication Alarm