TLS-450 Setup and Operation Screens Manual
285
Leak 0.1(0.38)
Indicates whether or not the probe supports the leak 0.1 (gph [0.38 lph]) option.
Possible messages:
• Yes
• No
Leak 0.2 (0.76)
Indicates whether or not the probe supports the leak 0.2 (gph [0.76 lph]) option.
Possible messages:
• Yes
• No
Leak 3.0 (11.3)
Indicates whether or not the probe supports the leak 3.0 (gph [11.3 lph]) option.
Possible messages:
• Yes
• No
Probe Diagnostics - Mag Options Screen Refresh Rate
The Mag Options data will be refreshed every 30 seconds.
Control Button (right of screen)
Probe Setup
Touch this button open the Device Setup - Probes
screen.