TLS-450 Setup and Operation Screens Manual
171
Automatic Events - Add Tasks - Device
The Automatic Events - Add Tasks - Device screen for Add or Edit a Task displays selections to control a
Device Automatically.
Event (Field)
Devices have NO controllable action. The action is determined by their setup. That is, if a relay is
'normally open' and the event happens the relay will change to closed. When the event clears, the relay
will go back to open (its normal state as per setup).
Touch this button to the select the event(s) from the drop-down list that will trigger the new task:
• Alarms
• External Inputs
Note: Notifications cannot be assigned for 'Device' action tasks. Default: Field is empty.
Device (Field)
Select the specific device from the drop-down list of available relays, pumps, lines. Only 1 device can be
selected per event. Default: First device in the list.
To Next Page
Loading...
Need help?
General
