TLS-450 Setup and Operation Screens Manual
332
Bus Address
This column contains the bus address of the device, e.g., B1.S1.4 (Master 450, Slot 1, terminal 4).
Type
This column contains the device label, e.g., Probe
NOTES:
1. If a module slot inside the console is not populated (or recognized by the system) type will be
'None'.
2. If a device position on a module is not populated (or recognized by the system) type will be
'None'.
Primary Assignment
This column contains the device's primary assignment, e.g., P4. An error mark '!' is shown in case of a
problem.
Secondary Assignment
This column contains the device's secondary assignment, e.g., T4:Product 4. An error mark '!' is shown in
case of a problem.