Veeder-Root TLS-450 - Console Troubleshooting; Common Console Issues

TLS-450 Setup and Operation Screens Manual
29
All Sensors Tab
Selecting Enable in the All Sensors Tab field and then touching the Advanced Setup button to the
right of the field opens the Display Setup - All Sensors Tab Advanced Setup screen. In this screen you
select informational text to display in the sensor graphic displayed on the home screen (System Status
'All Sensors') and on any System Status 'User Defined' screens, if assigned. The number of Sensor tabs
visible will be dependent upon the types of sensors installed.
Allowable selections: Enabled, Disabled
Default: Enabled
'User Defined 1' Tab
Selecting Enable in the User Defined 1 Tab field and then touching the Advanced Setup button to
the right of the field opens the Display Setup - User Defined 1 Tab Advanced Setup screen. In this
screen, you can create your own tab label as well as populate the display with your choice of tanks and
sensors.
Allowable selections: Enabled, Disabled
Default: Enabled
'User Defined 2' Tab
Selecting Enable in the User Defined 2 Tab field and then touching the Advanced Setup button to
the right of the field opens the Display Setup - User Defined 2 Tab Advanced Setup screen. In this
screen, you can create your own tab label as well as populate the display with your choice of tanks and
sensors.
Allowable selections: Enabled, Disabled
Default: Enabled
'User Defined 3' Tab
Selecting Enable in the User Defined 3 Tab field and then touching the Advanced Setup button to
the right of the field opens the Display Setup - User Defined 3 Tab Advanced Setup screen. In this
screen, you can create your own tab label as well as populate the display with your choice of tanks and
sensors.
Allowable selections: Enabled, Disabled
Default: Enabled