Appendix A
31
Web Access Setup Page
The TLS-450 Web Access Setup page example is shown below:
Web Access Security Password
To enable a security code to restrict access to the TLS-450 via Web Access, click the
Security Code Enable box in this page and enter up to a six alph-numeric password in
the field below.
Auto Refresh Page Data
To automatically refresh page data, click the box next to Auto Refresh. Click the arrow
beside the Refresh Time field and select a page refresh time of from 10 to 60 seconds.
Click the boxes beside any of the Refresh Tabs to apply the Auto Refresh setting to that
page's data.
To Next Page
Loading...
