TLS-450 Setup and Operation Screens Manual
31
Fuel Height
Allowable selections: Enabled, Disabled. Default: Disabled
Ullage 100%
Allowable selections: Enabled, Disabled. Default: Disabled
Ullage xx%
Ullage xx% can always be selected but will only be displayed in the tank status graphic display if you
enabled 'User defined ullage' in the Tank Setup - All Tanks Screen.
Allowable selections: Enabled, Disabled
Default: Disabled
Water Height
Note: This selection requires water measuring probes.
Allowable selections: Enabled, Disabled
Default: Disabled
Temperature
Allowable selections: Disabled, Bottom Text, On Tank
Default: Bottom Text
Alarm Condition Icon
Allowable selections: Enabled, Disabled
Default: Enabled
Delivery Indicator
Allowable selections: Enabled, Disabled
Default: Disabled
Water Volume (on icon)
Note: This selection requires water measuring probes.
Allowable selections: Disabled, Bottom Text, On Tank
Default: Bottom Text
Tank Ribbon Label
This selection determines what label will appear on the tank buttons along the bottom of the screen. The
system assigns the actual label or number from Tank/Device setup entries.
Allowable selections: Tank Label or Tank Number
Default: Tank Number
Density
Note: This selection requires density measuring probe.
Allowable selections: Enabled, Disabled . Default: Disabled
To Next Page
Loading...
