WAGO WAGO-I/O-IPC-C6 User Manual

WAGO-I/O-SYSTEM 750 CoDeSys 2.3 Runtime Environment 113
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
4. Enter the IP address of your I/O-IPC in the "Address" field in the
"Communication Parameters" window and then press the enter key on your
PC keyboard. To close the window, click in the window on [OK].
To select an already created I/O-IPC, select it in the left window and then
click on [OK].
Figure 15: Creating a new communication channel
5. Transfer the PLC program by clicking on Online in the menu bar and select
Login.
6. Remember that the I/O-IPC's Run/Stop switch must be in the "Run"
position.
7. Start the PLC program by clicking on Online in the menu bar and selecting
Run.

WAGO WAGO-I/O-IPC-C6 Specifications

General

Brand	WAGO
Model	WAGO-I/O-IPC-C6
Category	I/O Systems
Language	English