WAGO WAGO-I/O-IPC-C6 - 17 Use in Hazardous Environments

214 Use in Hazardous Environments WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Pos: 56.1 /Alle Serien ( Allgemeine Module)/E insatz in Ex-Bereic hen/Einsatz in explosions gefährdeten Bereic hen - Überschrift 1 @ 3\ mod_1224075191281_21.doc @ 24084 @ 1 @ 1
17 Use in Hazardous Environments
Pos: 56.2 /Serie 750 (W AGO-I/O-SYSTEM)/Ei nsatz in Ex-Bereichen/Ei nsatzbereich Ser ie 750 @ 3\mod_1234272230203_2 1.doc @ 27500 @ @ 1
The WAGO-I/O-SYSTEM 750 (electrical equipment) is designed for use in
Zone 2 hazardous areas.
The following sections include both the general identification of components
(devices) and the installation regulations to be observed. The individual
subsections of the "Installation Regulations" section must be taken into account if
the I/O module has the required approval or is subject to the range of application
of the ATEX directive.
Pos: 56.3 /Dokumentatio n allgemein/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1