WAGO WAGO-I/O-IPC-C6 - Figure 63: DP Parameters

138 PROFIBUS Master in CoDeSys 2.3 WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
6. Click on the "DP parameters" tab to adapt the station address of the slave.
Enter the station address that you assigned to the slave in the "Station
address" field. If the two station addresses do not agree, no communication
connection can be established.
Figure 63: DP parameters