WAGO WAGO-I/O-IPC-C6 User Manual

180 Operating System WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Pos: 48.5 /Serie 758 ( Funk, IPC und PFC)/Betri ebssystem/Betriebssy stem Linux 758-87x IPC - Li nux-Konsole @ 11\mod_1315 392799289_21.doc @ 78647 @ 23 @ 1
14.4 Linux Console
The Linux consoles are available via keyboard as follows:
1. Linux Console 2. Linux Console 3. Linux Console
Target visualization Linux IPC configuration tool
[Alt] + [F1] [Alt] + [F2] [Alt] + [F3]
If you want to deactivate individual consoles, you must modify the /etc/inittab file
on the device. You can do this using the integrated vi editor or via an FTP
upload/download. The /etc/inittab file contains the following lines:
tty1:2345:respawn:/sbin/getty 38400 tty1
tty2:23:respawn:/sbin/getty 38400 tty2
tty3:23:respawn:/etc/init.d/ipcconfig start
The three command lines start the three consoles described in the table.
If you comment individual lines using the "#" character, the corresponding
commented Linux console is not longer automatically executed during system
start.
14.4.1 Access to the Linux Console
You can access the Linux console through different paths. For one, through
Telnet; for another through the RS-232 interface. The Linux console can also be
accessed through a monitor on the DVI-I interface in combination with a USB
keyboard.
In the condition as delivered to the customer, the I/O-IPC is equipped with the
following users:
Table 69: Users for the Linux Console
Name Password
root wago
admin wago
user user
guest guest
You can also create and delete your own users:
sudo adduser [Benutzer]
sudo deluser [Benutzer] sudo

WAGO WAGO-I/O-IPC-C6 Specifications

General

Brand	WAGO
Model	WAGO-I/O-IPC-C6
Category	I/O Systems
Language	English