WAGO WAGO-I/O-IPC-C6 - Figure 28: Enter New Address

WAGO-I/O-SYSTEM 750 Commissioning 67
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
5. Enter the new IP address for the selected Ethernet interface and confirm it
with [OK]. If you want to return to the main menu without making changes,
select [Abort].
Figure 28: Enter new address
Note
You cannot assign IP addresses for both Ethernet interfaces in the same subnet.
Neither can you do this with the BootP or DHCP server.
Pos: 41.6 /Dokumentatio n allgemein/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1