WAGO WAGO-I/O-IPC-C6 User Manual

WAGO-I/O-SYSTEM 750 Appendix 253
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Pos: 64 /Alle Serien ( Allgemeine Module)/Über schriften für alle Seri en/Anhang - Überschri ft 1 @ 4\mod_1239874070437 _21.doc @ 30560 @ 1 @ 1
19 Appendix
Pos: 65 /Serie 758 (Funk, IPC und PFC)/Anhang/Anhang 7 58-87x WagoConfig ToolLIB_lib @ 12\mod_133853 9824410_21.doc @ 95800 @ 23 @ 1
19.1 WAGOConfigToolLIB.lib
With the function block of the CoDeSys "WAGOConfigToolLIB.lib" library,,
configure and parameterize the I/O-IPC like with the WBM and "IPC
Configuration Tool". You need the calls from the next Section. These have no
effect on the run time of the tasks because the functions are called asynchronsly.
configToolFB
bDone
bBusy
stResultString
iFbResult
iConfigToolResult
stConfigToolErrorString
bEnable
stCallString
Figure 118: Graphical representation of the "ConfigTool" function block
Table 127: "ConfigTool" function block
Parameter Name Data Type Description
bEnable BOOL The function block starts processing when the
input registers an ascending edge.
Input
stCallString STRING
(150)
Enter a call like in the Linux consol. An
overview of the calls is available in section
"Calls for the WAGOConfigToolLIB.lib
Library" .
bDone BOOL Indicates whether the function block is executed
fully or after canceled after reporting an error
code.
bBusy BOOL The function block processes a call.
Output
stResultString STRING
(80)
Return value displayed on the Linux console.
iFbResult INT The return values have the following meaning:
0: No error
1: Invalid input parameter, e.g. an
empty string at stCallString
2: Error at implementation of the
function block
3: Unknown Configtool
4: The Configtool result string is too large
for the function block return parameter
stResultString
iConfigToolResult INT The value corresponds directly to the Configtool
result parameter.
Output
stConfigToolError
String
STRING
(150)
This parameter displays the error description if
the call "wConfigToolResult" returns a value
≠ 0.

WAGO WAGO-I/O-IPC-C6 Specifications

General

Brand	WAGO
Model	WAGO-I/O-IPC-C6
Category	I/O Systems
Language	English