WAGO WAGO-I/O-IPC-C6 - Construction of the File System; Table 70: Construction of the File System

186 Operating System WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
14.4.3 Construction of the File System
The file system of the internal flash memory is partitioned as follows at delivery:
Table 70: Construction of the file system
Name Size
Master boot record and bootloader (grub) about 1.5 MB
Linux system partition 1 about 40 MB
Linux system partition 2 about 40 MB
Home partition about 40 MB
Pos: 48.23 /Serie 758 ( Funk, IPC und PFC)/Betr iebssystem/Betriebssy stem Linux 758-87x IPC - Aufbau des Dateisyste ms, Ergänzung Flash 400 MB @ 11\mod_1315396449363_21. doc @ 78785 @ @ 1
Remaining flash memory, not partitioned about 400 MB
Pos: 48.24 /Serie 758 ( Funk, IPC und PFC)/Betr iebssystem/Betriebssy stem Linux 758-87x IPC - Aufbau des Dateisyste ms, Verzeichnisstr uktur @ 11\mod_1315396507614 _21.doc @ 78791 @ 3322233 333333 @ 1
The file system also contains, as is customary for modern Linux distributions, the
following directories with the established programs/files:
bin Programs that can be executed
boot Kernel image and configuration of the bootloader.
dev Device driver files for the entire periphery of the I/O-IPC
etc Global configuration files of the I/O-IPC
config-
tools
WAGO-specific, executable configuration tools
network Configuration files for the ETHERNET interfaces.
init.d Start scripts
rc.d
Links to start scripts. All scripts named Sxx_ are executed during
booting of the I/O-IPC.
home
guest Home directory of a user who is logged on as a guest.