WAGO-I/O-SYSTEM 750 Device Description 19
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Pos: 32.1 /Alle Serien ( Allgemeine Module)/Ü berschriften für alle Serien/Gerätebeschr eibung/Gerätebesc hreibung - Überschri ft 1 @ 3\mod_123375608465 6_21.doc @ 27096 @ 1 @ 1
4 Device Description
Pos: 32.2 /Serie 758 ( Funk, IPC und PFC)/Gerätebe schreibung/Beschr eibung/Beschrei bung 758-87x 1 @ 10\mod_1312351 630395_21.doc @ 75582 @ @ 1
The I/O-IPC automation device is an industrial PC that can handle the control
tasks of a PLC. It is suitable for mounting on a DIN rail and distinguishes itself
with its various interfaces.
Pos: 32.3 /Serie 758 ( Funk, IPC und PFC)/Gerätebe schreibung/Beschr eibung/Querverweis für den Einsatz im Bereich der Fernwirktechnik – I PC @ 12\mod_1332764250794_21. doc @ 92113 @ @ 1
Telecontrol Applications
If the I/O IPC is used for telecontrol applications, observe both "IEC-61850
Solution for Programmable Telecontrollers" quickstart guide and "Quickstart
Guide for 750-872 ETHERNET Fieldbus Controller." These guides are available
on the Internet at www.wago.com "IEC-61850 Quickstart Guide" and
"IEC-60870 Quickstart Guide".
Pos: 32.4 /Serie 758 ( Funk, IPC und PFC)/Gerätebe schreibung/Beschr eibung/Beschrei bung 758-87x 2 @ 10\mod_1312884 861387_21.doc @ 76170 @ @ 1
You can connect all available I/O modules of the WAGO-I/O-SYSTEM 750/753
to the I/O-IPC. This allows any analog and digital signals from the automation
environment to be internally processed or to be made available to other devices
through one of the available interfaces.
Pos: 32.5 /Serie 758 ( Funk, IPC und PFC)/Gerätebe schreibung/Beschr eibung/Beschrei bung 758-87x 3 @ 10\mod_1312352 236554_21.doc @ 75590 @ @ 1
Transfer rates of 10 Mbit/s or 100 Mbit/s are possible via two independent
ETHERNET interfaces in both half-duplex and full-duplex operation.
Pos: 32.6 /Serie 758 ( Funk, IPC und PFC)/Gerätebe schreibung/Beschr eibung/Beschrei bung 758-87x 4 DPM @ 10\mod_13123523 18180_21.doc @ 75594 @ @ 1
For data exchange, there are implemented MODBUS/TCP,-/UDP and -/RTU
servers available, such as a PROFIBUS master.
PROFIBUS master
The PROFIBUS master currently does not support any DP/V1 services.
Pos: 32.7 /Serie 758 ( Funk, IPC und PFC)/Gerätebe schreibung/Beschr eibung/Beschrei bung 758-87x 5 @ 10\mod_13123526 18933_21.doc @ 75606 @ @ 1
Automation tasks can be executed in all IEC 61131-3-compatible languages with
the programming system CoDeSys 2.3 (WAGO-I/O-PRO CAA). The
implementation of the CoDeSys task processing is optimized with real-time
extensions in order to provide maximal performance for automation tasks. For
visualization, CoDeSys target visualization and web visualization are also
available in addition to the development environment.
Pos: 32.8 /Serie 758 ( Funk, IPC und PFC)/Gerätebe schreibung/Beschr eibung/Beschrei bung 758-87x 6 Zusatz nur für D PM und CANopen @ 10\mod_13123534826 58_21.doc @ 75610 @ @ 1
The fieldbus can be configured using the PLC configuration function of CoDeSys
2.3.
Pos: 32.9 /Dokumentatio n allgemein/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
To Next Page
Loading...
Need help?
General
