WAGO WAGO-I/O-IPC-C6 - Dpm_Global_Control

WAGO-I/O-SYSTEM 750 Appendix 293
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
19.3.3 DPM_GLOBAL_CONTROL
The DPM_GLOBAL_CONTROL function block sends specific global control
commands.
Category
PROFIBUS DP/V1 function blocks
Name
DPM_REDUNDANCY
Type
Function block
Name of library
WAGO_DPM_01.lib
Required libraries
Applicable to
758-87x-111
Input parameter
Name Data Type Description
CONTROL DPM_CONTROL See section Data Type
"DPM_CONTROL".
SLAVE_ADD BYTE PROFIBUS slave address
GROUP BYTE PROFIBUS group
ENABLE BOOL Function start
Output parameters
Name Data Type Description
CONFIRM BOOL Execution confirmation
Variable declaration
Graphical illustration