WAGO WAGO-I/O-IPC-C6 User Manual

WAGO-I/O-SYSTEM 750 Appendix 299
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
19.3.6 DPM_SET_SLAVE_ADDRESS
The DPM_SET_SLAVE_ADDRESS function block assigns a new PROFIBUS
address to a PROFIBUS node.
Category
PROFIBUS DP/V1 function blocks
Name
DPM_SET_SLAVE_ADDRESS
Type
Function block
Name of library
WAGO_DPM_01.lib
Required libraries
Applicable to
758-87x-111
Input parameter
Name Data Type Description
ACTUAL_ADD BYTE Current PROFIBUS slave address
NEW_ADD BYTE New PROFIBUS slave address
IDENT_NUMBER WORD Slave ID number
MODIFICATION BOOL Another change of the slave
address
ENABLE BOOL Function start
Output parameters
Name Data Type Description
CONFIRM BOOL Execution confirmation
RESPONSE FUNCTION_CODE See section Data Type
"FUNCTION_CODE".
Variable declaration
Graphical illustration

WAGO WAGO-I/O-IPC-C6 Specifications

General

Brand	WAGO
Model	WAGO-I/O-IPC-C6
Category	I/O Systems
Language	English