WAGO WAGO-I/O-IPC-C6 User Manual

60 Commissioning WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
8.2 Determining the IP Address of a Host PC
So that the host PC (e.g. notebook) can communicate with an I/O-IPC via the
ETHERNET, both must be located in the same subnet.
To determine the IP address of a host PC (with MS Windows operating system)
using the MS-DOS prompt, proceed as follows:
1. Click on "Start" and select "Execute".
2. Enter the command cmd and press the Enter key. A prompt opens.
3. Enter the command ipconfig and press the Enter key.
4. The IP address, subnet mask and standard gateway, including the
appropriate parameters, are displayed.

WAGO WAGO-I/O-IPC-C6 Specifications

General

Brand	WAGO
Model	WAGO-I/O-IPC-C6
Category	I/O Systems
Language	English