WAGO WAGO-I/O-IPC-C6 User Manual

WAGO-I/O-SYSTEM 750 Commissioning 63
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Table 25: Explanations of the configuration line
Parameter Description
Node_1 Name of the I/O-IPC with the I/O modules.
This can be freely chosen.
ht=1 Network hardware type. For ETHERNET, this
is 1.
ha=0030DE000200 MAC address of an ETHERNET interface.
ip= 192.168.1.2
ip= 192.168.1.100
IP address for an I/O-IPC located in the same
network as the host PC as well.
gw=192.168.1.1 IP address for the gateway. For a local
network, you do not need to specify a gateway.
Sm=255.255.255.0 Subnet mask of the subnet to which the I/O-
IPC is supposed to belong.

WAGO WAGO-I/O-IPC-C6 Specifications

General

Brand	WAGO
Model	WAGO-I/O-IPC-C6
Category	I/O Systems
Language	English