WAGO WAGO-I/O-IPC-C6 User Manual

256 Appendix WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Table 131: Description of the configuration scripts for "CoDeSys"
Parameter Status Call Output/Input Validity
CoDeSys
Project Details
Date read
get_rts_info
project date
Title read
get_rts_info
project title
Version read
get_rts_info
project version
Author read
get_rts_info
project author
Description read
get_rts_info
project description
Display of the project
information specified in
CoDeSys (Menu > Project
> Project Information)
immediate
CoDeSys State
State read
get_rts_info
state
Display of the CodeSys
status (RUN or STOP)
immediate
Table 132: Description of the configuration scripts for "TCP/IP"
Parameter Status Call Output/Input Validity
TCP/IP
Common Configuration Data
read
get_coupler_details
hostname
Display of the host name immediate
Hostname
write
change_hostname
hostname=<String>
Changing the host name.
Input a host name for
<String>.
after restart
Default Gateway
read
get_coupler_details
default-gateway
Display of the standard
gateway set
"Default
Gateway"
Interface
write
config_default_gateway
interface=<value>
Select the interface you
want to use as the standard
gateway.
eth0
eth1
none (no standard gateway
selected)
immediate
read
get_eth_config
eth0 default-gateway
get_eth_config
eth1 default-gateway
Display of the standard
gateway address.
Leads both to the same
result because the value is
always written for both
interfaces at the same time.
immediate
Default Gateway
Value
write
config_default_gateway
default-gateway-
value=<value>
Enter the address of the
standard gateway here. The
<value> is an IP address in
the format number.
number. number.
number.
after restart
DNS-Server
read
get_coupler_details
domain-name
Display of the domain
name.
Domain Name
write
edit_dns_server
domain-name=<String>
Changing the domain name.
Input a domain name for
<String>.
immediate

WAGO WAGO-I/O-IPC-C6 Specifications

General

Brand	WAGO
Model	WAGO-I/O-IPC-C6
Category	I/O Systems
Language	English