WAGO WAGO-I/O-IPC-C6 - Configuration Methods and Settings

70 Configuration WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Pos: 43 /Alle Serien ( Allgemeine Module)/Über schriften für alle Seri en/Inbetriebneh men - Konfigurier en - Parametrieren/Konfigur ieren - Überschr ift 1 @ 5\mod_1247578046546_21. doc @ 37410 @ 1 @ 1
9 Configuration
Pos: 44.1 /Serie 758 ( Funk, IPC und PFC)/Konf igurieren/Konfigur ieren 785-87x - allgemein 1 @ 10\ mod_1312455450627_21. doc @ 75901 @ 2 @ 1
The following methods are available for configuring the I/O-IPC:
• Access using the PC via Internet browser to the Web-based management
(section Configuration via "Web-based Management (WBM)")
• Access using the PC via a terminal program (via ETHERNET and/or RS-232
interface) to the "IPC Configuration Tool" (section "Configuration with a
Terminal Program")
• Access via the I/O-IPC using the touch screen/monitor and USB keyboard to
the "IPC Configuration Tool" (section "Configuration with
Touchscreen/Monitor and USB Keyboard")
• Access via the PLC program CoDeSys using WagoConfigToolLIB.lib (section
"Calling the ' WagoConfigToolLIB.lib'")
The "IPC Configuration Tool" makes the same parameters available for the
configuration of the I/O-IPC as the WBM. Descriptions of the parameters are
available in the section "Information" Page.