WAGO WAGO-I/O-IPC-C6 User Manual

WAGO-I/O-SYSTEM 750 PROFIBUS Master in CoDeSys 2.3 139
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
12.2 PLC Configuration Setting Choices
12.2.1 PROFIBUS-Master (I/O-IPC)
Via the tab for the I/O-IPC, you define the global settings and monitoring
parameters for the PROFIBUS master.
Base Parameter
Figure 64: "Base Parameters" tab
The following table explains the parameters listed in the register:
Table 58: Description of the Parameters
Base Parameters
Module id
Node id
Diagnostic address
Parameters that use the runtime system CoDeSys.
Comment Here, you can enter a comment

WAGO WAGO-I/O-IPC-C6 Specifications

General

Brand	WAGO
Model	WAGO-I/O-IPC-C6
Category	I/O Systems
Language	English