WAGO WAGO-I/O-IPC-C6 - Figure 73: Groups Tab; Table 66: Description of the Parameters

148 PROFIBUS Master in CoDeSys 2.3 WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Groups
Figure 73: "Groups" tab
The following table explains the parameters listed in the register:
Table 66: Description of the Parameters
Groups
Freeze Mode Here, set whether the input data of the salve is to be practically
"frozen" at a certain point in time. This function is currently not
available.
Sync. Mode Here, set whether the output data of the slave of a certain group
is to be synchronously written into the process image during a
multicast command.
This function is currently not available.
Group Membership Here, add the selected slave to a group for the use of multiple-
point transfers using multicast communication.
Global Group Properties Here, indicate whether a group of the "Sync. Mode" and/or the
"Freeze Mode" is to be used.