WAGO WAGO-I/O-IPC-C6 - Diaggetbusstate() and Diaggetstate()

154 PROFIBUS Master in CoDeSys 2.3 WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Pos: 46.15 /Serie 758 ( Funk, IPC und PFC)/Feldbusko mmunikation/CoDeSy s-Diagnose 758-87 x allgemein 2 @ 10\mod_131313109 6157_21.doc @ 76548 @ 33333 @ 1
12.5.2 DiagGetBusState() and DiagGetState()
To evaluate the diagnostics, you will need the following function blocks from the
library BusDiag.lib:
• DiagGetBusState() for the bus diagnostics
This function block provides you with general information on each connected
slave (e.g. number of slaves).
• DiagGetState() for the participant diagnostics
This function block provides you with detailed information on each slave (e.g.
information on diagnostics).