WAGO WAGO-I/O-IPC-C6 - Creation of Diagnostic Functions in Codesys 2.3; Figure 80: Resources Tab

WAGO-I/O-SYSTEM 750 PROFIBUS Master in CoDeSys 2.3 155
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
12.5.3 Creation of Diagnostic Functions in CoDeSys 2.3
To conduct bus diagnostics and participant diagnostics of the slaves, the library
BusDiag.lib must be contained in CoDeSys. This library contains the necessary
function blocks DiagGetBusState() for bus diagnostics and DiagGetState() for
participant diagnostics.
Integrate the BusDiag.lib library into CoDeSys as described below:
1. Click on the "Resources" tab.
Figure 80: "Resources" tab
2. Double click in the left field on "Library Manager."