WAGO WAGO-I/O-IPC-C6 User Manual

WAGO-I/O-SYSTEM 750 Appendix 261
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Table 135: Description of the configuration scripts for "Clock"
Parameter Status Call Output/Input Validity
Clock
Time and Date
read
get_clock_data
date-local
Local time and date
Date on Device,
local
write
config_clock
type=local
date=<date>
Change date. The format
for <date> is:
DD.MM.YYYY
read
get_clock_data
time-utc
Time/UTC
Time on Device,
UTC
write
config_clock
type=utc time=<Time>
Change time, based on
UTC time. The format for
<time> is:
hh:mm:ss xx
read
get_clock_data
time-local
Time/local time
Time on Device,
local
write
config_clock
type=local time=<Time>
Change time, based on local
time. The format for
<time> is:
hh:mm:ss xx
read
get_clock_data
display-mode
Display format of the time
in 12- or 24-hour format:
12-hour format or 24-hour
format
12-Hour Format
write
config_clock _
display_mode
display-mode=<value>
Set the display format of
the time. Entries for
<value> are:
12-hour-format
24-hour-format
immediate
Time zone
read
get_clock_data
tz-string
Currently set time zone –
original TZ string as stored
in the operating system.
TZ String
write
config_timezone
tz-string=<String>
Change TZ string directly.
Example of <string>:
CET-1CEST,
M3.5.0/2,M10.5.0/3
after restart

WAGO WAGO-I/O-IPC-C6 Specifications

General

Brand	WAGO
Model	WAGO-I/O-IPC-C6
Category	I/O Systems
Language	English