WAGO WAGO-I/O-IPC-C6 - Page 199

WAGO-I/O-SYSTEM 750 Diagnostics 199
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Table 71: I/O-IPC Operational Messages
Position LED Color/Status Cause Explanation/Remedy
Green 24V supply voltage is
available on the I/O-
IPC.
-
37 IDE/PWR
Red 24V supply voltage is
available on the I/O-
IPC and it is being
accessed on the internal
flash memory or the CF
card.
-
Green-red
flashing
The I/O-IPC is in the
startup phase.
-
Green No malfunction on the
I/O-IPC.
-
38 IO
Red, flashing Display of error
message through blink
code.
Evaluate the error code
(see Section "Error
Messages via I/O-
LED").
Pos: 51.4 /Dokumentatio n allgemein/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1