22 Device Description WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Pos: 32.17 /Serie 758 ( Funk, IPC und PFC)/Geräteb eschreibung/Ansch lüsse/Anschlüsse 758- 87x - Tabelle 3 @ 10\mod_131235 5828748_21.doc @ 75632 @ @ 1
9
DVI interface (X7),
D-sub socket, 24+5
To connect a digital or analog monitor. A "DVI
to VGA" adapter is required to connect a monitor
via a VGA cable.
10 Interface for electronic supply (X4)
Power supply for the 24 V electronic supply of
the I/O-IPC. The power supply is protected
against reverse polarity.
11
Integrated input and output (X5),
15-pole D-sub socket
Interface for connecting direct digital signal
generators.
12
Serial RS-232 interface (X6),
9-pole D-sub plug
Physical connection to the Linux console,
MODBUS/RTU, IO-Check or CoDeSys.
This interface can be configured via Web-based
management or Linux console.
Pos: 32.18 /Dokumenta tion allgemein/Glied erungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
To Next Page
Loading...
