WAGO WAGO-I/O-IPC-C6 - Page 270

270 Appendix WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
Table 141: Description of the configuration scripts for "MODBUS"
Parameter Status Call Output/Input Validity
read
get_rts3scfg_value
MODBUS_RTU Baud
Baud rate for
MODBUS/RTU
Baudrate
write
change_rts_config
area=MODBUS_RTU
Baud=<value>
Change the baud rate for
MODBUS/RTU. Entries for
<value> are:
2400
4800
9600
19200
38400
57600
115200
Databit read
get_rts3scfg_value
MODBUS_RTU
Data_Bits
Data bit number for
MODBUS/RTU
read
get_rts3scfg_value
MODBUS_RTU Parity
Parity value for
MODBUS/RTU
Parity
write
hange_rts_config
area=MODBUS_RTU
Parity=<value>
Change the parity for
MODBUS/RTU. Entries for
<value> are:
None
Odd
Even
read
get_rts3scfg_value
MODBUS_RTU
Stop_Bits
Stop bits for
MODBUS/RTU
Stop Bits
write
change_rts_config
area=MODBUS_RTU
Stop_Bits=<value>
Set the number of stop bits
for MODBUS/RTU. Entries
for <value> are:
1
2
Flow Control read
get_rts3scfg_value
MODBUS_RTU
Flow_control
Flow control value for
MODBUS/RTU
immediate