WAGO WAGO-I/O-IPC-C6 - Page 288

288 Appendix WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Manual
Version 1.0.0
(* Get UInteger value *)
IF bGetValueOID_UINT32 = TRUE THEN
wError := snmpGetValueCustomOID_UINT32(sOID3, uiValue);
bGetValueOID_UINT32 := FALSE;
END_IF;
The custom OIDs can be registered, queried, and set via the “TEST” visualization
form:
Figure 1: "TEST" visualization form
Pos: 68 /Dokumentati on allgemein/Glieder ungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1