WMF PERFECT - ASSEMBLING THE PRESSURE COOKER; ASSEMBLING THE LID

3| Boil the vinegar water in the pot
1
without
the lid
6
for approx. 5-10 minutes.
4| Afterwards, wash all parts thoroughly by hand.
5| Dry all parts well after cleaning.
6.3| ASSEMBLING THE PRESSURE COOKER
CAUTION
Risk of burns caused by
incorrectly assembled lid
The lid must not be assembled incorrectly.
Assembly must follow the manner described.
•
Observe the instructions strictly.
•
Check for correct fit.
6.4| ASSEMBLING THE LID
(see image series H)
1| Check lid rim, lid handle, safety devices and
seal ring for dirt or clogging.
2| Turn the lid
6
so that the rim faces downwards.
3| Turn the handle
11
and hold in place.
4| Attach the holding slot
17
on the lid handle
11
to the holder
8
on the lid
6
.
5| Slowly lower the handle
11
into place.
6| Turn lid
6
over using the handle
11
.
7| Position the lid
6
and handle
11
so that the
cooking indicator seal
18
is not squished or
damaged by the edges of the lid openings.
8| Carefully press down the lid
6
until you hear
it click into place. Check that it has engaged
correctly by pressing on the slider.
9| Insert the seal ring
21
into the pot's rim and
carefully press under the rim. The seal ring
21
must be positioned fully under the curved
pot rim.
6.5| PUTTING LID ON
(see image series F)
1| Place pot
1
on a firm surface.
2| Place lid
6
on the pot
1
with the rim facing
downwards. The placement marking
9
on
the lid and the handle marking
4
must line
up, otherwise the lid cannot be put on. The
seal ring
21
must be inserted into the lid rim!
3| Hold the handle
3
of the pot
1
with the
left hand.
4| With the right hand, use handle B to swivel
the lid
6
round to the left.
5| When both handles
3
/
11
are lined up
exactly with each other, push the slider to
the LOCK position.
7| OPERATING THE
PRESSURE COOKER
7.1| CHECK SAFETY DEVICES
Remove the lid
6
as described in Section 6.1.
1| Carefully pull the seal ring
21
out of the pot’s
rim and place aside.
2| Remove the lid handle
11
as described in
Section 6.1.
3| Check that the seal ring
21
and the inner lid
rim are clean.
4| Check that...
•
the safety slot
10
on the lid rim,
•
the pressure regulation device
15
•
the pressure indicator
16
•
the handle locking device
14
•
the safety valve
7
are clean and not clogged.
 Soak and clean incrustations, remove clogs
(see Section 12.1 Cleaning).
33
ZHtw TR TH SV SL SK RU RO PT PL NO NL KO ID HU HR FI EL DA CS BG ZHcn IT ES FR EN DE