YASKAWA GA700 Series - Page 1017

Document No. EZZ024429
Prepared in March 2022
6
3. Support of F6-54 [DeviceNet Idle Fault Detection] in EtherNet/IP protocol
Up till now, only the DeviceNet protocol has been supported on the F6-54. However, the EtherNet/IP protocol is now
supported.
■Revised Content
(Before Modifications)
No.
(Hex.)
Name
Description
Default
(Range)
F6-54
(03C4)
DeviceNet Idle
Fault Detection
Sets the function to detect EF0 [Option Card External Fault] when the
drive does not receive data from the DeviceNet master.
0
(0 - 4)
(After Modifications)
F6-54
(03C4)
Net Idle Fault
Detection
Sets the function to detect EF0 [Option Card External Fault] when the
drive does not receive data from the DeviceNet or Ethernet/IP master.
0
(0 - 4)