YASKAWA GA700 Series

11.3 Parameter Groups
476 YASKAWA SIEPC71061705H GA700 Series Technical Manual
11.3 Parameter Groups
Represents the type of product parameters.
Parameters Name
A1 Initialization
A2 User Parameters
b1 Operation Mode Selection
b2 DC Injection Braking and Short Circuit Braking
b3 Speed Search
b4 Timer Function
b5 PID Control
b6 Dwell Function
b7 Droop Control
b8 Energy Saving
b9 Zero Servo
C1 Accel & Decel Time
C2 S-Curve Characteristics
C3 Slip Compensation
C4 Torque Compensation
C5 Auto Speed Regulator (ASR)
C6 Duty & Carrier Frequency
d1 Frequency Reference
d2 Reference Limits
d3 Jump Frequency
d4 Frequency Ref Up/Down & Hold
d5 Torque Control
d6 Field Weakening /Forcing
d7 Offset Frequency
E1 V/f Pattern for Motor 1
E2 Motor Parameters
E3 V/f Pattern for Motor 2
E4 Motor 2 Parameters
E5 PM Motor Settings
E9 Motor Setting
F1 PG Option Setup (Encoder)
F2 Analog Input Option
F3 Digital Input Option
F4 Analog Output Option
F5 Digital Output Option
F6 Communication Options
F7 Ethernet Options
H1 Digital Inputs
H2 Digital Outputs
H3 Analog Inputs
Parameters Name
H4 Analog Outputs
H5 Modbus Communication
H6 Pulse Train Input/Output
H7 Virtual Inputs / Outputs
L1 Motor Protection
L2 Power Loss Ride Through
L3 Stall Prevention
L4 Speed Detection
L5 Fault Restart
L6 Torque Detection
L7 Torque Limit
L8 Drive Protection
L9 Drive Protection 2
n1 Hunting Prevention
n2 Auto Freq Regulator (AFR)
n3 High Slip/Overexcite Braking
n4 Adv Open Loop Vector Tune
n5 Feed Forward Control
n6 Online Tuning
n7 EZ Drive
n8 PM Motor Control Tuning
o1 Keypad Display
o2 Keypad Operation
o3 Copy Keypad Function
o4 Maintenance Monitors
o5 Log Function
q DriveWorksEZ Parameters
r DriveWorksEZ Connections
T0 Tuning Mode Selection
T1 InductionMotor Auto-Tuning
T2 PM Motor Auto-Tuning
T3 ASR and Inertia Tuning
T4 EZ Tuning
U1 Operation Status Monitors
U2 Fault Trace
U3 Fault History
U4 Maintenance Monitors
U5 PID Monitors
U6 Operation Status Monitors
U8 DriveWorksEZ Monitors