YASKAWA GA700 Series

4.6 Keypad Operation
162 YASKAWA SIEPC71061705H GA700 Series Technical Manual
◆ Examine User Custom Parameters
The User Custom Parameters show the parameters set in A2-01 to A2-32 [User Parameter 1 to User Parameter
32]. This lets users to quickly access and change settings to these parameters.
Note:
The User Custom Parameters always show A1-06 [Application Selection] at the top of the list. The A2-01 to A2-32 settings change when
the A1-06 setting changes, which makes it easier to set and reference the necessary parameter settings.
1. Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If [Home] is not shown on , push (Back) to show [Home] on .
2. Push (Menu).
3. Push or to select [User Custom Parameters], then push .
4. Push or to show the parameter to examine.
5. To re-edit a parameter, push or , select the parameter to edit, then push .
6. Push or to select the digit, then push or to change the value.