4.6 Keypad Operation
168 YASKAWA SIEPC71061705H GA700 Series Technical Manual
4. Push or to select [Modified Parameters], then push .
5. Push .
6. Push or to show the parameter to examine.
7. To re-edit a parameter, push or , select the parameter to edit, then push .
8. Push or to select the digit, then push or to change the value.
9. When you are done changing the value, push .
The parameter revision procedure is complete.
◆ Restore Modified Parameters to Defaults
This procedure will set all parameters with changed values to their default settings.
To Next Page
Loading...
