2.9 Change the Drive Enclosure Type
54 YASKAWA SIEPC71061705H GA700 Series Technical Manual
2.9 Change the Drive Enclosure Type
The enclosure type of the drive is IP20/UL Open Type. You must install a UL Type 1 kit to change the enclosure
type to an enclosed, IP20/UL Type 1.
Install the kit before you wire the drive.
Different drives use different UL Type 1 kits. Refer to Table 2.12 to find the kit for your drive. Contact Yaskawa
or your nearest sales representative for more information about UL Type 1 kits.
Table 2.12 UL Type 1 Kits by Drive Model
Model Option Model
2004, 2006, 2010, 2012, 2018, 2021, 2030, 2042
4002, 4004, 4005, 4007, 4009, 4012, 4018, 4023
900-192-121-001
2056
4031, 4038
900-192-121-002
2070
4044, 4060
900-192-121-003
2082 900-192-121-004
2110
4075
900-192-121-005
2138
4089, 4103
900-192-121-006
2169
4140, 4168
900-192-121-007
2211 900-192-121-008
2257, 2313
4208, 4250, 4296
900-192-121-009
2360, 2415
4371, 4389
900-192-121-010
4453, 4568, 4675 900-192-121-011