YASKAWA GA700 Series

i.1 Receiving
14 YASKAWA SIEPC71061705H GA700 Series Technical Manual
i.1 Receiving
These instructions contain the information necessary to use the product correctly. Read and understand the safety
information and precautions before you start to use the product.
◆ Glossary
Phrase Definition
AOLV Advanced Open Loop Vector Control
AOLV/PM Advanced Open Loop Vector Control for Permanent Magnet Motors
CLV Closed Loop Vector Control
CL-V/f Closed Loop V/f Control
CLV/PM Closed Loop Vector Control for Permanent Magnet Motors
Drive YASKAWA AC Drive GA700
EDM External Device Monitor
EZOLV EZ Open Loop Vector Control
HD Heavy Duty
IPM motor Interior Permanent Magnet Motor
MFAI Multi-Function Analog Input
MFAO Multi-Function Analog Output
MFDI Multi-Function Digital Input
MFDO Multi-Function Digital Output
ND Normal Duty
OLV Open Loop Vector Control
OLV/PM Open Loop Vector Control for Permanent Magnet Motors
PM motor Permanent Magnet Synchronous Motor (generic name for IPM motors and SPM motors)
SIL Safety Integrity Level
SPM motor Surface Permanent Magnet Motor
V/f V/f Control
■ Icons to Identify Screw Shapes
Table i.1 Icons to Identify Screw Shapes
Icon Screw Shape
Phillips/slot combo (+/-)
Slotted (-)
Minus (-)
Hex bolt (cross-slotted)
Hex bolt (slotted)
Icon Screw Shape
Hex self-locking nut
Hex socket cap (WAF: 5 mm)
Hex socket cap (WAF: 6 mm)
Hex socket cap (WAF: 8 mm)
◆ About Registered Trademarks
• CANopen is a registered trademark of CAN in Automation (CIA).
• CC-Link is a registered trademark of CC-Link Partner Association.
• DeviceNet is a registered trademark of Open DeviceNet Vendor Association, Inc. (ODVA).
• EtherCAT is a registered trademark of Beckhoff Automation GmbH.
• EtherNet/IP is a registered trademark of Open DeviceNet Vendor Association, Inc. (ODVA).
• LonWorks and LonTalk are registered trademarks of Echelon Corporation.
• MECHATROLINK-I, MECHATROLINK-II, and MECHATROLINK-III are registered trademarks of
MECHATROLINK Members Association (MMA).