YASKAWA GA700 Series

4.6 Keypad Operation
166 YASKAWA SIEPC71061705H GA700 Series Technical Manual
4. Push or to select the item to verify, then push .
5. Push or to select [Verify (drive → keypad)], then push .
6. Push or to select the data to verify, then push .
The keypad shows “End” when the parameter settings backed up in the keypad agree with the parameter settings
copied to the drive.
Note:
The keypad shows vFyE [Parameters do not Match] when the parameter settings backed up in the keypad do not agree with the
parameter settings copied to the drive. Push one of the keys to return to the screen in Step 6.
◆ Delete Parameters Backed Up to the Keypad
This procedure deletes the parameters that you backed up to the keypad.
1. Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper right-hand corner of the screen.
• If the screen does not show [Home] for , push (Back), and then push to show [Home].
2. Push (Menu).
3. Push or to select [Parameter Backup/Restore], then push .