YASKAWA GA700 Series

4.5 Items to Check before Starting Up the Drive
148 YASKAWA SIEPC71061705H GA700 Series Technical Manual
parameters and doing Auto-Tuning. Refer to Set Parameters Using the Setup Wizard on page 175 for more
information.
Note:
If the keypad does not show the Initial Setup screen, select [Initial Setup] from the Main Menu to show the Initial Setup screen.
1. Make the initial settings for each item.
A - Language Selection
B - Set Date/Time
C - Setup Wizard
D - Show Initial Setup Screen
Note:
If you select [Yes] from the [Show Initial Setup Screen] setting, the keypad will show the Initial Setup screen each time the
drive is energized.
If you select [NO], the keypad will not show the Initial Setup screen each time the drive is energized, starting with the next
time.
2. Push [Home].
The display shows the HOME screen.